Gamma Series Reverse Osmosis Systems
Membrane filtration process for pure water is called Reverse Osmosis, which is applied to waters in which the classical treatment systems are insufficient (sea water, well waters with high conductivity, etc.) separating all unwanted minerals from the water and obtaining pure water.
- Description
Description
GAMA SERIES REVERSE OSMOSIS SYSTEMS
150 m3/day to 1650 m3/day
STANDARD FEATURES
- Membrane covers FRP
- TFC Spiral windings membranes 8″ diameter
- AISI304 or AISI316 quality stainless steel vertical centrifugal high pressure pump
- ST-37 Epoxy painted carbon steel or AISI304 Stainless steel chassis
- Cartridge filter with 5 micron sensitivity
- Low pressure line U-PVC PN16
- High pressure line AISI304 Stainless steel
- Butterfly valve with inlet electric actuator
- Pressure regulating globe valves in pump outlet and waste water line
- Low and high pressure switch
- Product water and wastewater flow meters
- Glycerine manometers
- Product water water conductivity indicator (0-2000µS / cm)
- Product water pH meter (optional)
- Autoflush, automatic rinsing and chemical washing System
- On-Off switch
- PLC and operator panel
- 380 V / 50Hz / 3ph
- IP56 control board
Recommended Inlet Water Limits
Inlet water TDS: 0 – 2,000 ppm
Operating pressure: 10 to 15 bar
Inlet water pressure: 2 to 5 bar
ASC dosage required if hardness is more than 3 French
pH Range: 6-8
Silica (Si02) Tolerance: max. 25 ppm. @ 60% efficiency
Max. Inlet water temperature = 30º C Max.
Max Iron (Fe) tolerance: 0.05 ppm, 0.2 ppm if ASC is dosed
Hydrogen Sulfide should not be.
There should be no blur (NTU)
